If a National ID QR code will not scan, first make sure all four corners of the code are inside the camera frame, the screen is clean and bright, and your connection is stable. The Philippine Statistics Authority (PSA) recommends scanning a Digital National ID at least three times before concluding that verification failed.
How QR Verification Works
The Digital National ID contains a QR code. To check that the ID is authentic, a person opens the National ID Check at everify.gov.ph/check, allows camera access, and holds the QR code inside the camera frame with all four corners visible. According to the PSA, the camera captures the code automatically.
There are two possible results:
- Success. The pop-up message "National ID has been Verified" appears along with the registered person's details, which should match the Digital National ID.
- Failure. The pop-up message "QR Code could not be read" appears.
For the full process, see our guide on how to verify a Digital National ID.
PhilID cards and ePhilIDs have their own QR check. The PhilSys handbook describes a website called PhilSys Check at verify.philsys.gov.ph for verifying the QR code of a PhilID or ePhilID. It lists results such as verified, deactivated card, "QR Code could not be read," and a prompt to connect to the internet to verify authenticity. The examples in this article focus on the Digital National ID.
Why the Scan Fails
The PSA lists three possible reasons for the message "QR Code could not be read":
- The QR code is damaged.
- The information in the QR code has been tampered with.
- The QR code is not from the National ID.
Not every failure is a problem with the ID itself. A failed scan can also come from how the code is shown or captured:
- The screen is dirty, cracked, dim, or reflecting light.
- The QR code is partly outside the frame, or the camera is at an angle.
- The phone is moving or the camera is out of focus.
- The image is small, blurry, or low quality.
- The camera permission is off.
- The connection is weak or the checking site is slow.
- The code was copied, edited, or is not from the official system.
Because so many causes are ordinary, do not assume the ID is fake after one failed scan. Try the fixes below first.
Fix Display and Camera Issues
These steps help whether you are the person showing the ID or the person scanning it:
- Clean the screen. Wipe fingerprints and smudges from the display and the camera lens.
- Raise the brightness. A bright screen makes the QR code easier to read. Turn off any screen filter or dark mode setting that dims the code.
- Reduce glare. Move away from strong light shining directly onto the screen.
- Center the code. Keep all four corners of the QR code inside the camera frame, as the PSA advises.
- Hold steady at the right distance. Not too close, not too far, and not tilted.
- Allow camera access. If the camera does not open, check the browser or app permission in your phone settings.
- Use the original file. Open the Digital National ID you downloaded from an official channel. A small copy, a resized image, or a forwarded picture may be less clear. If you have not downloaded yours, see how to get your Digital National ID.
Fix Network or App Issues
- Check your connection. Verification needs to reach online systems. Switch between Wi-Fi and mobile data, or move to a place with better signal. The PhilSys FAQ also advises making sure your internet connection is stable before retrying.
- Refresh the page or restart the browser. Close the tab and open the checking site again.
- Try another browser or device. If one phone cannot scan the code, try another.
- Update the app. If a bank, e-wallet, or lender app is doing the scan, update it to the latest version.
- Wait and retry. If a site seems slow or busy, try again later.
- Scan at least three times. This is the PSA's own recommendation after a failed result.
If the problem happens inside a bank, e-wallet, or lender app, that app may have its own limits or error messages. Read our guides on using the Digital National ID for e-wallet signup and on what to do when an app cannot verify your National ID.
When the QR Code Is Invalid
If you have cleaned the screen, improved the lighting, checked the connection, and scanned at least three times, but the result is still "QR Code could not be read," consider these possibilities:
- The file is damaged or incomplete. Download a fresh copy from the official channel.
- The ID is not from the official system. A file shared by a stranger, or an edited image, should not be trusted.
- The details were altered. If the result does not match the information on the ID, do not accept the ID as verified.
The PSA recommends that the holder report an unsuccessful verification to the nearest PSA office. To report suspected fraud, the PSA lists the PhilSys hotline 1388, the email info@philsys.gov.ph, and the PSA PhilSys Facebook page. If you are a customer and an institution cannot verify your QR code, you can also offer another accepted ID if the provider allows it.
For a broader troubleshooting list, read our pillar guide on Digital National ID verification problems and fixes. If your Digital National ID does not appear in the app at all, see what to do when it is not showing in eGovPH.
QR Verification and Loan Applications
Some lenders ask you to show or upload your National ID during an application. Before you apply, check that your QR code scans correctly and read the lender's list of accepted IDs. You can compare options for an online loan using digital national id philippines on our homepage, but always read each lender's own requirements first.